XINNA Z26 IV Filter 2.0/3.0/5.0 μm - High-Quality China Factory Suppliers for Precision Filtration Solutions
Product Introduction
Features
- Compact construction
- Quick priming and air elimination
- Low protein binding filter membrane
- Various pore size options that enable retention of particles, bacteria and fungi
- Range of connectors to accommodate a variety of tubing configurations
- Amber or brown colored housing for light sensitive drugs
Characteristics
| Dimensions | 51*31.6*13mm ( inlet/outlet connector included) |
| Connector | Φ 3.1mm/3.6mm |
| Max burst pressure | 3.6bar (52.5psi) |
| Venting air flow rate | 10ml/min@5kpa |
| Priming volume | ≤2.0ml |
| Operating temp | 10-30℃ |
| Pyrogenicity | ≤0.5EU/ml |
| Storage temp | 5-40℃ |
| Sterilization | Ethlene oxide (Max 60℃) |
Performance
Package
- 4000pcs/carton, 4 inner PE bags with 1000 pcs inside each. Each bag is sealed separately and cushioned between each other.
- Each bag is labeled with information as following, different lots in one box are closed separately and labeled separately to prevent mix up.
Label Information
| Name | Specifications | Batch No. |
| Model | Quantity | Operator No. |
Warnings
- Filter for medical use, assembled in clean room only. Remove the external bag before planting into a clean room.
- Handle with care. Keep filter in vertical position with flow arrow on both sides and the printing mark before assembling.
- Be careful on glueing, if Hydrophilic PES membrane contact with glue, membrane will break down.
- Alcohol is not allowed to contact with housing, or it will damage the ABS-based housing visible or invisible.
- It's not recommended to use alcohol or any kind of disinfectant in direct contact with venting membrane, PTFE membrane will become hydrophilic until dried.
- Blood delivery is not allowed, the filter clogs with blood or red blood cells.
- Filters with 2μm filter media is not recommended for TPN and lipids administration.
- Rigorous testing is recommended before marketing if drugs is not common.
- Contact Xinna-Medical for more information if any doubt is exist advanced.
Ordering Information
| Appearance | Housing | Filter media options | Mold | Connector | Vents |
|---|---|---|---|---|---|
| GLOO | 026 | 500 | Z | OY | Y |
| GLBC | 020 | 300 | - | ON | - |
| - | - | 200 | - | 1S | - |
Frequently Asked Questions (FAQ)
The Z26 Intravenous Filter is an air-eliminating (self-venting) filter designed for intravenous use to remove particulate debris, microbial contaminants, and entrained air bubbles during medical infusions.
It features a low protein binding Hydrophilic Polypropylene (PP) membrane (2.0–5.0μm) that is chemically and biologically inert, offering broad compatibility with various drugs.
Yes, amber or brown lightproof colored housings are functionally designed to effectively block light, ensuring the stability and safety of light-sensitive infusion fluids.
No. Blood delivery is not allowed as it will clog the filter. Additionally, filters with 2μm filter media are not recommended for TPN (Total Parenteral Nutrition) and lipid administration.
Alcohol should not come into direct contact with the ABS-based housing as it can cause damage. Avoid direct contact of alcohol or disinfectants with the PTFE venting membrane as it affects performance until completely dried.
The filters are sterilized using Ethylene Oxide (Max 60℃). They are packaged in cartons of 4,000 pcs, containing 4 individually sealed inner PE bags with 1000 pcs each, complete with lot-specific labeling.