Low-Cost Hydrophobic CO2 Sampling Line Filter from China Suppliers - Factory Direct Bacteria Filter Solutions
Product Introduction
CO2 Sampling Line Filter as the name indicates, is designed for integration with etCO2 sampling lines in capnography monitoring systems. The disposable filter from us consists of two pieces of housings sealed around a filtering hydrophobic membrane, which acts as a sterile barrier. The housings are made of medical grade ABS, and the filter media incorporated is a custom-made hydrophobic PTFE membrane filter which features two-side 0.2μm PTFE material providing the right combination of airflow, bacterial retention and liquid barrier capabilities. In gas sampling lines, these filters ensure gas sample purity, prevent waste of anesthetic gases and accurately measure CO2 level, providing precisely tuned filtration to CO2 monitoring and sampling while simultaneously protecting both the monitoring equipment and the patient from potential contamination.
The hydrophobic bacteria filters from us are Class 100,000 cleanroom manufactured with fully automated assembly technology, and the sealing is done without any glues or solvents - they are ultrasonically welded. And the inline Anti-Microbial filters are available with Male/Female luer lock connectors, each connector meets the ISO standard for connections, thereby guaranteeing compatibility and safety across a wide range of medical devices. Each and every piece of the micron filter for a bulk order is tested by our advanced machines and inspected manually and final-tested for technical parameters in our own laboratory before packaging and delivery to guarantee superior and consistent quality.
Features
- Hydrophobic filter
- Standard female/male luer lock connectors
- Two-side 0.2 μm PTFE filter media
- Protection against airborne contamination during aspiration
- High and stable flow rate
- Liquid barrier
- High biosafety level
- 100% Inspection
Specifications
| Filter Media | 0.22μm Hydrophobic PTFE |
| Housing | Medical grade ABS |
| Dimensions | 25.5*21.2mm (Luer connector included) |
| Weight | 2.2g |
| Venting area | 1.13cm² |
| Air flow rate | 0.22μm ≥25ml/min@5kpa |
| Max burst pressure | 4.0bar (58.0psi) |
| Operating temperature | 5-40℃ |
| Liquid burst pressure | 0.22μm ≥3.0bar (43.5psi) |
| Connector | Luer lock connector compatible with GB/T 1962.2-2001(ISO 594-2). |
| Pyrogenicity | ≤0.5EU/PC |
| Storage temperature | 0-50℃ |
| Sterilization | Ethylene oxide (Max 60℃) |
Applications
The hydrophobic filter is designed and manufactured in such a way that they can be used safely for various clinical situations that would require a bacterial filter. And the single-use filter device can be attached to most cannulas with male and female luer lock connectors. These filters allow you to vent out air or other gases while retaining the water-based fluids that will be used to aid in the treatment of patients, therefore are commonly used in air vent functions within medical devices including:
- EtCO2 (Capno) Sampling Lines: Gas sample purity
- Intravenous lines: Inline air venting
- Hemodialysis lines: Pressure transducer protection
- Breathing Systems: Breathing circuit sterilization
- Most cannulas & pressure flow, snore sensors
Packing Details
6000pcs/carton containing 3 inner PE bags with 2000 pcs each. Each bag is sealed individually with protective air cushion between each other. Each bag is labeled with necessary information, and different lots in one carton are wrapped and labeled separately to prevent mix up.
Frequently Asked Questions (FAQ)
1. What is the primary function of the CO2 Sampling Line Filter?
The filter is designed to integrate with etCO2 sampling lines in capnography monitoring systems. It ensures gas sample purity, prevents the waste of anesthetic gases, and protects both patients and monitoring equipment from potential contamination.
2. What materials are used in the construction of this filter?
The filter housing is constructed from medical-grade ABS. The internal filter media is a custom-designed, two-side 0.2μm/0.22μm hydrophobic PTFE membrane filter that provides an optimal combination of airflow, bacterial retention, and liquid barrier protection.
3. Are the connectors compatible with standard medical devices?
Yes, the inline anti-microbial filters are equipped with standard Male and Female luer lock connectors. Each connector fully complies with ISO standards (ISO 594-2 / GB/T 1962.2-2001), ensuring wide compatibility and safe connection with various medical devices.
4. How is the quality and safety of these filters guaranteed?
Our filters are manufactured in a Class 100,000 cleanroom using fully automated assembly and ultrasonic welding (without any glues or solvents). Additionally, 100% of the filters undergo manual inspection and technical parameter testing in our laboratory before delivery.
5. What are the main clinical applications for this hydrophobic filter?
They are widely used in air vent functions within medical devices, including EtCO2 sampling lines, intravenous lines (for inline air venting), hemodialysis lines (for pressure transducer protection), breathing systems, and most cannulas or snore sensors.
6. How are the filters packaged for bulk shipping?
They are packed with 6,000 pieces per carton, containing 3 individually sealed inner PE bags of 2,000 pieces each. Protective air cushions are placed between the bags, and each bag is labeled with detailed batch information to prevent mix-ups.




