Hot Products
0102030405
Inline Hydrophobic Suction Bacteria Filter - China Suppliers & Factory for Suction Aspirators
Product Introduction
A suction bacteria filter is specifically designed as a replacement component tailored for use with suction aspirator. In aspirator systems, suction filter is commonly placed between the suction pump and the secretion canister to prevent bacterial and particulate contaminate from entering hospital suction system or equipment.
A suction filter generally consists of two housings sealed around a filtering hydrophobic membrane, and the effectiveness of a suction filter to act as such a sterile barrier mainly depends on its key component: the hydrophobic PTFE (polytetrafluoroethylene) membrane built into the filter. The custom-made 0.2μm PTFE membrane allows adequate airflow to pass through while effectively blocking liquids, bacteria, aerosolized particles and other microorganisms with 99.9% efficiency, preventing any potential introduction of harmful contaminants into the suction system, reducing the risk of infections that could compromise patient health or equipment functionality.
Engineered to meet high standards of quality and compatibility, the suction filters we provide can be seamlessly integrated into various hospital aspirator systems, providing reliable filtration that upholds the integrity of the aspirator's functionality. Regular replacement of this filter is recommended to sustain uninterrupted operation and adherence to health protocols.
Features
- Hydrophobic filter
- Two-side 0.2μm PTFE membrane
- High and stable air flow rate
- Liquid barrier with high WBT pressure rating
- High biosafety level
- 100% Inspection
Applications
Suction systems
Gas sampling lines
Medical breathing systems
Single-use venting filters
Warnings
Handle with care to avoid damaging the filter material.
Sterilization by irradiation is not recommended.
Do not use glue or cyclohexanone for joining with housing as it will clog the material itself, preventing gas from passing through.
Avoid contact with alcohol or highly permeable solvents, otherwise, the material will become hydrophilic before it fully dries.
Frequently Asked Questions
Q: Where is a suction bacteria filter typically installed in an aspirator system?
In medical aspirator systems, the suction bacteria filter is commonly installed between the suction pump and the secretion canister to prevent bacterial and particulate contaminants from entering the hospital suction system or equipment.
Q: What is the key component that makes the suction filter an effective sterile barrier?
The key component is the built-in custom-made 0.2μm hydrophobic PTFE (polytetrafluoroethylene) membrane. It allows adequate airflow to pass through while blocking liquids, bacteria, aerosolized particles, and microorganisms with 99.9% efficiency.
Q: What are the primary features of the suction filters?
Key features include a hydrophobic design, two-side 0.2μm PTFE membrane, high and stable air flow rate, liquid barrier with high WBT pressure rating, high biosafety level, and 100% quality inspection.
Q: What materials or substances should be avoided when handling the filter?
You should avoid using glue or cyclohexanone for joining the filter to the housing as they can clog the material. Additionally, avoid contact with alcohol or highly permeable solvents, which can cause the hydrophobic material to become hydrophilic before drying.
Q: Why is regular replacement of the suction filter recommended?
Regular replacement is recommended to sustain uninterrupted system operation, protect the equipment from contaminants, and ensure compliance with healthcare safety protocols.