0102030405
Hydrophobic Membrane for Venting Caps & Priming Filters - China Factory & Suppliers for Medical Applications
Product Introduction
We choose Hydrophobic PTFE membrane which is wide used filter media for medical air vents, closing caps, priming filters. It is a high-end micro porous material which possesses natural hydrophobicity and broad chemical compatibility. Which as part of IV set: closing caps, priming filters with PTFE membrane is a venting device whose main function is covering the distal end of the intravenous (IV) line, which is not attached to a catheter or a needle.
To be an air vent: air elimination is an important feature, it prevents the flow and spillage of the intravenous fluid to the outside environment. But allows the passage of air that has been entrapped in the intravenous line or tubing. Air flow key performance indicator that should be considered when choosing a venting membrane.
Our biaxially stretched PTFE venting membrane has wide options of substrates of non-woven materials to ensure material compatibility between the membrane and its housing, also guarantee welding integrity.
Working with us, you can expect tailored membrane solutions to satisfy your complicated applications and functional demand. The expanded structure of PTFE itself allows a range of customized options of pore sides to meet various requirements on airflow rate and bacteria or particulate filtration.
Features
- Naturally Hydrophobic and wide Chemical compatibility
- With medical-class PET or PP support
- High air flow (depends on the filtration area and pore size of the membrane)
- Great performance on air elimination
- Excellent mechanical strength
- Anti-bacterial (depends on the pore size of the membrane)
- Good welding strength
Specifications
| Parameter | Specification Details |
|---|---|
| Material | PTFE-PP/PTFE-PET |
| Thickness | Customizable |
| Pore size | 0.22μm/0.45μm/1.2μm |
| WBT | 0.22μm:200Kpa@15min;0.45μm:150Kpa@15min;1.2μm:60Kpa@15min |
| Air Flow (mL/cm2/min) | 0.22μm:300;0.45μm: 700;1.2μm: 2300 |
| Endotoxin | <0.5EU/ml |
Performance
Applications
- Air venting
- Closing caps
- Priming filters
- Gas filtration
- TSP ambient air monitoring
- Bacterial isolation
Closing caps which is also called priming caps are equipped on the infusion set end , have strict requirements for breathability and waterproofness, even bacterial resistance during use. XINNA PTFE membrane with pore size 0.22/0.45/1.2μm perfectly solve these problems, achieving a dual effect of breathability and protection.
This material has long-term durability to meet various working conditions. We can provide rolls ,sheets or discs.
Warning
- Handle with care to avoid damaging the filter material.
- Sterilization by irradiation is not available
- Do not use glue or cyclohexanone for adhesion as it can clog the material itself, preventing gas from passing through.
- Avoid contact with alcohol or high-permeability solvents, otherwise, the material will become hydrophilic before it is fully dried.
Ordering Information
| Material | Pore Size | Thickness (μm) | Size |
|---|---|---|---|
| PTFEs | 022 | 120 | Roll |
| 045 | 150 | Sheet | |
| 120 | 200 | Customizable | |
| - | Customizable | - |
Frequently Asked Questions
What are the main functions of the hydrophobic PTFE venting membrane in medical applications?
The main functions are air venting and air elimination. It covers the distal end of the intravenous (IV) line to prevent the flow and spillage of intravenous fluid to the outside environment, while allowing entrapped air to pass through freely.
What pore sizes and materials are available for the venting caps?
The PTFE membrane is available in pore sizes of 0.22μm, 0.45μm, and 1.2μm. The supporting materials are medical-class PET or PP, ensuring high compatibility and excellent mechanical strength.
Can these PTFE membranes be sterilized using irradiation?
No, sterilization by irradiation is not available for these PTFE membranes. Please refer to alternative sterilization methods compatible with PTFE and its supporting materials.
Why should I avoid using glue or cyclohexanone for adhesion?
Glue or cyclohexanone should not be used because they can clog the micro porous structure of the membrane itself, which prevents gas from passing through and compromises the venting functionality.
What happens if the PTFE membrane comes into contact with alcohol?
Contact with alcohol or high-permeability solvents should be avoided, as it will make the naturally hydrophobic material hydrophilic before it is fully dried, affecting its liquid barrier performance.





