Hydrophilic Medical Filters with PES Membrane
Product Introduction
IV Filter with hydrophilic PES membrane(0.2/1.2/5.0μm) in an ABS-based polymers housing.
Non-toxic, non-sterile.
The product is provided for further manufacturing, processing and repackaging.
Features
- Vented liquid filter
- Auto- air-stop
- High flow rate
- High throughput
- High filtration efficiency
- Low Extractables
- Low protein and drug binding
Characteristics
| Dimensions |
25.5*21.2mm
(Luer connector included) |
| Connector |
Luer Lock connector compatible with GB/T 1962.2-2001(ISO 594-2) |
| Max burst pressure | 4.0bar
(58.0psi) |
| Filtration Area | 1.13cm² |
| Operating Temperature | 10-30℃ |
| Pyrogenicity | ≤0.5EU/ml |
| Storage Temperature | 5-40℃ |
| Sterilization | Ethlene oxide (Max 60℃) |
Performance
Package
6000pcs/carton, 3 inner PE bags with 2000 pcs inside each. each bag is sealed separately and cushion between each other.
Each bag is labeled with information as following, different lots in one box are closed separately and labeled seperately to prevent mix up.
Label information
Warnings
· Filter for medical use, assembled in clean room only, Remove the external bag before planting into a clean room.
· Handle with care. Be careful on glueing, if Hydrophilic PES membrane contact with glue, membrane will breaks down.
· Alcohol is not allowed to contact with housing, or it will damage the ABS-based housing visible or invisible.
Ordering Information
| APPEARANCE | HOUSING DIMENSION | FILTER PORE SIZE | MOLD | CONNECTOR | VENTS | |
|
GLOL |
012 | 500 | T | 2 | Y | N |
|
GLOB |
120 | |||||
| 022 | ||||||