Hydrophilic PES Medical Filters Manufacturers in China - Trusted Suppliers and Factory for Particle Removal Solutions
Product Introduction
IV Filter with hydrophilic PES membrane (0.2/1.2/5.0μm) in an ABS-based polymers housing.
Non-toxic, non-sterile.
The product is provided for further manufacturing, processing and repackaging.
Features
- Vented liquid filter
- Auto-air-stop
- High flow rate
- High throughput
- High filtration efficiency
- Low Extractables
- Low protein and drug binding
Characteristics
| Dimensions | 25.5*21.2mm (Luer connector included) |
|---|---|
| Connector | Luer Lock connector compatible with GB/T 1962.2-2001 (ISO 594-2) |
| Max burst pressure | 4.0bar (58.0psi) |
| Filtration Area | 1.13cm² |
| Operating Temperature | 10-30℃ |
| Pyrogenicity | ≤0.5EU/ml |
| Storage Temperature | 5-40℃ |
| Sterilization | Ethylene oxide (Max 60℃) |
Performance
Package
6000pcs/carton, 3 inner PE bags with 2000 pcs inside each. Each bag is sealed separately and cushioned between each other.
Each bag is labeled with information as following, different lots in one box are closed separately and labeled separately to prevent mix up.
Label Information
Warnings
Ordering Information
| APPEARANCE | HOUSING DIMENSION | FILTER PORE SIZE | MOLD | CONNECTOR | VENTS |
|---|---|---|---|---|---|
| GLOL | 012 | 500 | T | 2 / Y | N |
| GLOB | - | 120 | - | - | - |
| - | - | 022 | - | - | - |
Frequently Asked Questions (FAQ)
The IV filter features a hydrophilic PES (Polyethersulfone) membrane housed in high-quality ABS-based polymers.
No, the product is supplied non-toxic and non-sterile. It is designed for further manufacturing, processing, and repackaging before final medical application.
This IV filter is available in pore sizes of 0.2μm, 1.2μm, and 5.0μm to accommodate different medical filtration requirements.
Ensure the hydrophilic PES membrane does not contact any glue, as this will break down the membrane structure. Additionally, avoid letting alcohol contact the ABS-based housing to prevent visible or invisible damage.
The filters are packed at 6000 pieces per carton, divided into 3 inner PE bags containing 2000 pieces each. Each bag is sealed individually with protective cushioning to prevent damage.
The maximum burst pressure is 4.0 bar (58.0 psi), and the filter is compatible with Ethylene Oxide (EO) sterilization up to a maximum temperature of 60℃.