Hot Products
0102030405
Hydrophilic PES Medical Filters - 0.2/1.2/5.0µm | China Suppliers & Factory Quality Standards
Product Introduction
IV Filter with hydrophilic PES membrane (0.2/1.2/5.0μm) in an ABS-based polymers housing.
Non-toxic
Non-sterile
The product is provided for further manufacturing, processing and repackaging.
Features
- Vented liquid filter
- Auto-air-stop
- High flow rate
- High throughput
- High filtration efficiency
- Low Extractables
- Low protein and drug binding
Characteristics
| Specification | Details |
|---|---|
| Dimensions | 25.5*21.2mm (Luer connector included) |
| Connector | Luer Lock connector compatible with GB/T 1962.2-2001 (ISO 594-2) |
| Max burst pressure | 4.0bar (58.0psi) |
| Filtration Area | 1.13cm² |
| Operating Temperature | 10-30℃ |
| Pyrogenicity | ≤0.5EU/ml |
| Storage Temperature | 5-40℃ |
| Sterilization | Ethylene oxide (Max 60℃) |
Performance
Package
6000pcs/carton, 3 inner PE bags with 2000 pcs inside each. Each bag is sealed separately and cushioned between each other.
Each bag is labeled with information as follows. Different lots in one box are closed separately and labeled separately to prevent mix-up.
Label Information
Warnings
Filter for medical use, assembled in clean room only. Remove the external bag before bringing into a clean room.
Handle with care. Be careful during gluing; if the Hydrophilic PES membrane contacts glue, the membrane will break down.
Alcohol is not allowed to contact the housing, as it will damage the ABS-based housing visibly or invisibly.
Ordering Information
| APPEARANCE | HOUSING DIMENSION | FILTER PORE SIZE | MOLD | CONNECTOR | VENTS | |
|---|---|---|---|---|---|---|
| GLOL | 012 | 500 | T | 2 | Y | N |
| GLOB | - | 120 | - | - | - | - |
| - | - | 022 | - | - | - | - |
Frequently Asked Questions (FAQ)
What type of membrane is used in the IV Filter?
The IV Filter is equipped with a hydrophilic PES membrane, which is available in pore sizes of 0.2μm, 1.2μm, and 5.0μm, enclosed in an ABS-based polymer housing.
Is the product sterile upon delivery?
No, the product is provided in a non-toxic and non-sterile state, specifically intended for further manufacturing, processing, and repackaging.
What are the connector specifications for this filter?
It features a Luer Lock connector that is fully compatible with GB/T 1962.2-2001 (ISO 594-2) standards.
What precautions should be taken regarding glue and alcohol contact?
You must avoid contact between the hydrophilic PES membrane and glue, as glue will break the membrane down. Additionally, alcohol must not contact the housing to avoid visible or invisible damage to the ABS-based material.
How is the IV Filter packaged and shipped?
The filters are packed with 6000 pieces per carton, distributed into 3 separate inner PE bags containing 2000 pieces each. Each bag is sealed individually with protective cushioning. Different manufacturing lots are packaged and labeled separately to prevent mix-ups.
What are the temperature limits for storage and sterilization?
The storage temperature range is 5-40℃. For sterilization, Ethylene oxide can be used up to a maximum temperature of 60℃.