0102030405
Double Drip Chamber with Vented Spike for Adult Infusion Set - Reliable Suppliers & Factory in China
Product Introduction
The IV drip chamber is a very important part of infusion set. Drip chamber is usually associated with tube in intravenous injection therapy. It generally has multiple types such as double drip chambers, winged drip chambers, and vented drip chambers.
XINNA ‘s IV drip chamber is designed to dual drip chambers with air vented spike . It is mainly used for observing and estimating the manual IV setup’s speed by visualizing the number of drops into chamber per 60 seconds. We must pay attention to that the drip chamber must always be half full during use. If the liquid exceeds half, the dripping of the liquid will not be visible. If there is too little liquid, air can easily enter the intravenous injection tube and eventually enter the circulatory system, triggering a risk of infusion.
We can see that there is a vent on the spike , which is mainly suitable for intravenous infusion bottles made of glass. Ventilation holes can allow air to enter the intravenous injection bottle and change the liquid level. With the injection of air, the liquid in the glass bottle can smoothly descend and maintain a suitable liquid level in the drip chamber.
There’s a filter membrane installed at the bottom of the drip chamber. The main function of a filter membrane is to filter out bacteria, precipitates, and insoluble particles entered during drug preparation, treatment, and mixing processes, protecting patients from the dangers caused by particles and ensuring infusion safety.
Features
- Unique design
- Sharp piercing spike for easy handling
- Antibacterial air vent
- With fluid filter (<15μm)
- 20 drops 1 ml ± 0.1 ml
- With Closing cap
Specifications
| Fitting tube | ID 3.0mm |
| Length | 80mm |
| Color | Transparent/Green |
| Raw material | DEHP-free PVC ,PE ,PVC |
| Pyrogenicity | ≤0.5EU/ml |
| Storage temp | 5-40℃ |
| Sterilization | Ethlene oxide (Max 60℃) |
Applications
Infusion Therapy
Packing
Products packed in the big PE bag ,1800 or 2000 pcs/carton, no sterilization
Frequently Asked Questions (FAQ)
What is the primary function of XINNA's IV drip chamber?
It is designed as a dual drip chamber with an air-vented spike, primarily used to observe and estimate the manual IV setup speed by counting the drops entering the chamber per 60 seconds.
Why must the drip chamber remain half full during infusion therapy?
Keeping the chamber half full ensures safety. If it is more than half full, the dripping is not visible. If it is less than half full, air can easily enter the tube and the patient's circulatory system, causing infusion risks.
What is the purpose of the air vent on the spike?
The air vent is designed for glass infusion bottles. It allows air to enter the bottle to change the liquid level, enabling the liquid to flow down smoothly and maintain a correct level in the drip chamber.
How does the filter membrane protect the patient?
The bottom-installed fluid filter membrane (<15μm) filters out bacteria, precipitates, and insoluble particles introduced during drug preparation and mixing, ensuring patient safety.
What materials are used to manufacture the IV drip chamber?
The product is manufactured using high-quality DEHP-free PVC, PE, and PVC raw materials to maintain medical safety standards.
How are the drip chambers packaged?
They are packaged non-sterile in large PE bags, containing either 1,800 or 2,000 pieces per shipping carton.





