0102030405
China Suppliers Factory Medical Grade Hydrophilic PES Filtration Membrane for Safe Infusion Filters
Product Introduction
Particles which contamination for IV solutions including incomplete mixing of drugs, Debris of glass, plastic, rubber from containers, ampoules, stoppers or components of the infusion systems.
XINNA’S PES (Polyethersulfone) Membrane has a unique asymmetric structure. The material itself has excellent physical and mechanical properties. Super hydrophilic, high flow rate, long service life on characteristics.
It comes in different pore sizes, and work with a variety of infusion protocols and drugs categories, such as protein-based drugs, clear fluid medication or lipids. We believe it’s the most suitable choice of filtration media which used for drugs delivery & intravenous therapy.
Features
- Unique asymmetric structure
- Super hydrophilic properties
- Ultra-high contamination capacity
- High porosity
- Low dissolution
- Low protein adsorption
Specifications
| Material | Pore size (μm) | Thickness (μm) | Bubble point (bar) | Flow rate (ml/cm2/min@0.1bar) |
|---|---|---|---|---|
| PES | 0.1 | ≥110 | ≥2.60 | ≥0.4 |
| PES | 0.2 | ≥110 | ≥3.60 | ≥3.2 |
| PES | 0.45 | ≥110 | ≥2.50 | ≥5.7 |
| PES | 0.8 | ≥110 | ≥1.10 | ≥12.0 |
| PES | 1.2 | ≥120 | ≥0.70 | ≥25.0 |
| PES | 5 | ≥120 | ≥0.20 | ≥100.0 |
Welding compatibility
- Thermal welding.
- Radio-frequency welding.
- Insert moulding.
Sterilization
Compatible with EO, Gamma irradiation sterilization, Autoclave sterilization
Other applications
- Bacteria-free filtration.
- Bacteria isolation and cultured.
- Pharmaceutical filtration.
Performance
Warnings
- Ultrasonic welding could damage the membrane structure directly if welding head presses the membrane directly.
- Do not touch adhesives such as cyclohexanone or similar glue or solvent, which will completely destroy the filter material.
- Not suitable for blood filtration.
- Handle with care, no wide angel fracture (over 90°) or scratch the surface that could damaging the membrane.
- In order to maximize product performance, asymmetric filtration membranes need to be installed according to the label which marks air side to separate upstream and downstream.
Ordering Information
| Material | Pore Size | Thickness(μm) | Size |
|---|---|---|---|
| PES | 010 | 110 | roll |
| PES | 022 | 110 | disc |
| PES | 045 | 110 | customizable |
| PES | 080 | 110 | - |
| PES | 120 | 120 | - |
| PES | 500 | 140 | - |
Frequently Asked Questions (FAQ)
Q1
What are the main advantages of XINNA'S PES Membrane in IV therapy?
XINNA'S PES membrane features a unique asymmetric structure with super hydrophilic properties, high flow rate, ultra-high contamination capacity, and low protein adsorption, making it ideal for drug delivery and intravenous therapy.
Q2
Which sterilization methods are compatible with this PES membrane?
The PES membrane is fully compatible with Ethylene Oxide (EO), Gamma irradiation sterilization, and Autoclave sterilization.
Q3
What welding methods can be used during assembly?
It supports Thermal welding, Radio-frequency welding, and Insert moulding. Direct ultrasonic head pressing on the membrane should be avoided to prevent structural damage.
Q4
Is this PES membrane suitable for whole blood filtration?
No, as noted in the product warnings, this membrane is not suitable for blood filtration.
Q5
What product formats and pore sizes are available for ordering?
Pore sizes range from 0.1 μm to 5 μm (ordering codes 010, 022, 045, 080, 120, 500) and can be ordered in roll, disc, or customizable formats.
Q6
How should the asymmetric PES membrane be installed correctly?
To maximize filtration performance, install the membrane according to the label indicating the air side to properly separate upstream and downstream flows.





