China Suppliers Factory Medical Grade Hydrophilic PES Filtration Membrane for Safe Infusion and IV Therapy
Product Introduction
Particles which contamination for IV solutions including incomplete mixing of drugs, Debris of glass, plastic, rubber from containers, ampoules, stoppers or components of the infusion systems.
XINNA’S PES (Polyethersulfone) Membrane has a unique asymmetric structure. The material itself has excellent physical and mechanical properties. Super hydrophilic, high flow rate, long service life on characteristics.
It comes in different pore sizes, and work with a variety of infusion protocols and drugs categories, such as protein-based drugs, clear fluid medication or lipids. We believe it’s the most suitable choice of filtration media which used for drugs delivery & intravenous therapy.
Features
- Unique asymmetric structure
- Super hydrophilic properties
- Ultra-high contamination capacity
- High porosity
- Low dissolution
- Low protein adsorption
Specifications
| PES | Pore size (μm) | Thickness (μm) | Bubble point (bar) | Flow rate (ml/cm2/min@0.1bar) |
|---|---|---|---|---|
| PES | 0.1 | ≥110 | ≥2.60 | ≥0.4 |
| 0.2 | ≥110 | ≥3.60 | ≥3.2 | |
| 0.45 | ≥110 | ≥2.50 | ≥5.7 | |
| 0.8 | ≥110 | ≥1.10 | ≥12.0 | |
| 1.2 | ≥120 | ≥0.70 | ≥25.0 | |
| 5 | ≥120 | ≥0.20 | ≥100.0 |
Welding Compatibility
- Thermal welding.
- Radio-frequency welding.
- Insert moulding.
Sterilization
Compatible with EO, Gamma irradiation sterilization, Autoclave sterilization
Other Applications
- Bacteria-free filtration.
- Bacteria isolation and cultured.
- Pharmaceutical filtration.
Performance
Warnings
- Ultrasonic welding could damage the membrane structure directly if welding head presses the membrane directly.
- Do not touch adhesives such as cyclohexanone or similar glue or solvent, which will completely destroy the filter material.
- Not suitable for blood filtration.
- Handle with care, no wide angel fracture (over 90°) or scratch the surface that could damaging the membrane.
- In order to maximize product performance, asymmetric filtration membranes need to be installed according to the label which marks air side to separate upstream and downstream.
Ordering Information
| Material | Pore Size | Thickness(μm) | Size |
|---|---|---|---|
| PES | 010 | 110 | roll |
| 022 | 110 | disc | |
| 045 | 110 | customizable | |
| 080 | 110 | ||
| 120 | 120 | ||
| 500 | 140 |
Frequently Asked Questions
Q1: What are the main filtration hazards that XINNA's PES membrane prevents in IV solutions?
A: The PES membrane filters out dangerous particles including incomplete mixing of drugs, as well as debris of glass, plastic, and rubber originating from containers, ampoules, stoppers, or components of the infusion systems.
Q2: What unique features make this PES membrane suitable for drug delivery?
A: It features a unique asymmetric structure, super hydrophilic properties, ultra-high contamination capacity, high porosity, low dissolution levels, and low protein adsorption rates.
Q3: Which sterilization methods can be used with this membrane?
A: The membrane is compatible with Ethylene Oxide (EO) sterilization, Gamma irradiation sterilization, and Autoclave sterilization methods.
Q4: Are there any specific welding limitations for the PES membrane?
A: It is compatible with thermal welding, radio-frequency welding, and insert moulding. However, direct ultrasonic welding should be avoided if the welding head presses directly onto the membrane, as this can damage its structure.
Q5: How should the asymmetric membrane be oriented during installation?
A: To achieve maximum product performance, the membrane must be installed according to the label marking the air side to properly separate the upstream and downstream flow.
Q6: What pore sizes and sizes are available for ordering?
A: The membrane comes in pore sizes ranging from 0.1 to 5.0 μm (010 to 500) and thicknesses from 110 to 140 μm. It is available in roll, disc, or customizable sizes.





