0102030405
China Suppliers Factory Hydrophobic Glass Fiber Filter for Efficient Infusion Spike Venting and High Air Flow Rate
Product Introduction
Our hydrophobic glass fiber membrane is comprised of a glass fiber matrix and performance binder. And our treatment in the manufacturing process makes the filter material both hydrophobic and oleophobic.
Using hydrophobic glass fiber membrane as a vent filter in medical application, could be used in application which require gases exchanging frequently like inlet venting caps of IV set and drugs transfer accessories while reducing the risk of airborne bacterial contamination. Especially, it can be used as filtration media in a low-pressure air & gas delivery which can equalize pressure immediately between drug vessels and the external environment while reducing the deformation of drug vessels.
The use of a hydrophobic glass fiber membrane as a vent in medical devices and equipment Increasingly wider, that means it’s very necessary provide a barrier to airborne contaminants to protect patients, drugs and equipment safety from aerosolized contaminants. Hydrophobic glass fiber filter is a very economical option for air venting which both performs high air flow rates with adequate filtration efficiency ratings.
Features
- Hydrophobic and oleophobic
- High air flow rate and filtration efficiency
- Retention of complex particles
- High temperature application stability
- Barrier to airborne contaminants
- Binder-free optional
- Sterilization methods: EO, Autoclave, Gamma & irradiation
- Sealing methods: Mechanical, Insert molding
Specifications
| Property | Value |
|---|---|
| Material | Glass Fiber |
| Thickness | 400μm |
| Pore size | 0.5μm |
| WBT | 15Kpa@15min |
| Air Flow (ml/min/cm2) | >812~985 |
| Endotoxin | <0.5EU/ml |
Applications
- Air venting for IV infusion sets
- Gas venting filter
- Hydrophobic & oleophobic barrier
- Fermentation tanks
- TSP Ambient Air Monitoring
- Environmental chambers
Warnings
Handle with care to avoid damaging the filter material.
Do not use glue or cyclohexanone for adhesion as it can clog the material itself, preventing gas from passing through.
Ordering Information
| Material | Pore Size | Thickness(μm) | Size |
|---|---|---|---|
| G | 050 | 450 | Roll |
| GF | - | Customizable | Disc |
| - | - | - | Customizable |
Frequently Asked Questions
Q: What is the composition of the hydrophobic glass fiber membrane?
A: The membrane is comprised of a high-quality glass fiber matrix combined with a performance binder, treated specifically during manufacturing to offer both hydrophobic and oleophobic properties.
Q: What are the primary medical applications for this membrane?
A: It is widely used as a vent filter in medical devices requiring frequent gas exchange, such as inlet venting caps of IV sets, drug transfer accessories, and low-pressure air & gas delivery systems.
Q: How does the membrane protect patients and medical equipment?
A: It acts as an effective barrier to airborne and aerosolized contaminants, preventing bacterial contamination and equalizing pressure immediately between drug vessels and the external environment.
Q: What sterilization methods are compatible with this membrane?
A: The membrane supports multiple sterilization methods, including Ethylene Oxide (EO), Autoclave, and Gamma & irradiation.
Q: What precautions should be taken during installation and sealing?
A: Handle the material with care to avoid damage. Do not use glue or cyclohexanone for adhesion, as these substances can clog the membrane and prevent gas from passing through.
Q: Are custom sizes and thicknesses available for order?
A: Yes, we offer customizable thicknesses and sizes in both roll and disc formats to fit your specific device design requirements.





