Hot Products
0102030405
China Suppliers Factory Double Drip Chamber with Vented Spike for Adult Infusion Set
Product Introduction
The IV drip chamber is a very important part of infusion set. Drip chamber is usually associated with tube in intravenous injection therapy. It generally has multiple types such as double drip chambers, winged drip chambers, and vented drip chambers.
XINNA ‘s IV drip chamber is designed to dual drip chambers with air vented spike . It is mainly used for observing and estimating the manual IV setup’s speed by visualizing the number of drops into chamber per 60 seconds.
We must pay attention to that the drip chamber must always be half full during use. If the liquid exceeds half, the dripping of the liquid will not be visible. If there is too little liquid, air can easily enter the intravenous injection tube and eventually enter the circulatory system, triggering a risk of infusion.
We can see that there is a vent on the spike , which is mainly suitable for intravenous infusion bottles made of glass. Ventilation holes can allow air to enter the intravenous injection bottle and change the liquid level. With the injection of air, the liquid in the glass bottle can smoothly descend and maintain a suitable liquid level in the drip chamber.
There’s a filter membrane installed at the bottom of the drip chamber. The main function of a filter membrane is to filter out bacteria, precipitates, and insoluble particles entered during drug preparation, treatment, and mixing processes, protecting patients from the dangers caused by particles and ensuring infusion safety.
Features
- Unique design
- Sharp piercing spike for easy handling
- Antibacterial air vent
- With fluid filter (<15μm)
- 20 drops 1 ml ± 0.1 ml
- With Closing cap
Specifications
| Fitting tube | ID 3.0mm |
| Length | 80mm |
| Color | Transparent/Green |
| Raw material | DEHP-free PVC ,PE ,PVC |
| Pyrogenicity | ≤0.5EU/ml |
| Storage temp | 5-40℃ |
| Sterilization | Ethlene oxide (Max 60℃) |
Applications
Infusion Therapy
Packing
Products packed in the big PE bag ,1800 or 2000 pcs/carton, no sterilization
Frequently Asked Questions
Why must the IV drip chamber always be kept half full during use?
The drip chamber must remain half full to ensure safe infusion. If it is more than half full, the dripping process cannot be visually observed. If it is less than half full, air can easily enter the intravenous injection tube and eventually the patient's circulatory system, causing an infusion risk.
What is the purpose of the air vent on the spike?
The air vent on the spike is designed primarily for glass intravenous infusion bottles. It allows air to enter the bottle, enabling the liquid to descend smoothly and maintain a proper liquid level in the drip chamber.
What is the function of the filter membrane at the bottom of the drip chamber?
The filter membrane acts as a barrier to filter out bacteria, precipitates, and insoluble particles introduced during drug preparation, mixing, and treatment, protecting patients and ensuring overall infusion safety.
What materials are used to manufacture this IV drip chamber?
The IV drip chamber is manufactured using high-quality raw materials including DEHP-free PVC, PE, and standard PVC.
How is the product packaged and sterilized?
The products are packed non-sterile in large PE bags, containing either 1800 or 2000 pieces per carton. However, the specifications support Ethylene oxide sterilization up to a maximum temperature of 60℃.