0.2μm Hemodialysis Blood Line Transducer Protectors - China Suppliers & Factory Solutions
Product Introduction
Features
- 0.2 μm hydrophobic filter
- Female luer lock and male luer lock to ensure safe and secure connection
- Connecting blood tubing with dialysis machine
- Ridged finger grip around the outside edge for better grip
- Allowing only sterile air to pass through, protecting patients and equipment from cross contamination
- Hydrophobic barrier separating blood and dialyzing fluid from sensitive transducer devices
Specifications
| Filter Media | 0.22μm Hydrophobic PTFE |
| Housing | Medical grade ABS |
| Dimensions | 25.5*21.2mm (Luer connector included) |
| Weight | 2.2g |
| Venting area | 1.13cm² |
| Air flow rate | 0.22μm ≥25ml/min@5kpa |
| Max burst pressure | 4.0bar (58.0psi) |
| Operating temperature | 5-40℃ |
| Liquid burst pressure | 0.22μm ≥3.0bar (43.5psi) |
| Connector | Luer lock connector compatible with GB/T 1962.2-2001(ISO 594-2). |
| Pyrogenicity | ≤0.5EU/PC |
| Storage temperature | 0-50℃ |
| Sterilization | Ethylene oxide (Max 60℃) |
Packing Details
6000pcs/carton containing 3 inner PE bags with 2000 pcs each. Each bag is sealed individually with protective air cushion between each other. Each bag is labeled with necessary information, and different lots in one carton are wrapped and labeled separately to prevent mix up.
Frequently Asked Questions
What is the primary function of the Transducer Protector?
It serves as an inline protective medical device for pressure monitors within the hemodialysis system, preventing contamination and protecting patients and equipment from cross-contamination.
What filter media is used in the device?
The device uses a 0.22μm Hydrophobic PTFE membrane filter which allows only sterile air to pass through while acting as a barrier to keep blood and dialyzing fluid separated.
What type of connector does the Transducer Protector use?
It features female luer lock and male luer lock connectors compatible with GB/T 1962.2-2001 (ISO 594-2) to ensure a safe and secure connection.
What are the dimensions and weight of the product?
The dimensions are 25.5*21.2mm (including the luer connector) and it weighs approximately 2.2g.
How is this product packaged for bulk shipment?
It is packaged with 6000pcs per carton, containing 3 inner PE bags with 2000pcs each. Each bag is sealed individually with protective air cushions and labeled separately by lot.
What is the sterilization method used for the Transducer Protector?
The Transducer Protector is sterilized using Ethylene oxide (with a maximum temperature of 60℃).